Request A Quote
phone location_on
Services

Metrology Services in Austin, TX

HAK Metrology Solutions delivers ultra-precision dimensional inspection and measurement services to manufacturers across Austin and Central Texas — deploying directly to your facility, on your schedule. From semiconductor component validation to first article inspection for aerospace assemblies, we bring the accuracy your production demands straight to you.

Austin-area manufacturers operate at the forefront of some of the most demanding industries in the country. Tolerances are tight, schedules are unforgiving, and quality failures carry real consequences. HAK Metrology Solutions is a Texas-based metrology company with over 30 years of combined experience in manufacturing, programming, and inspection services. We provide both on-site measurement at your Austin facility and in-house laboratory services for parts that require our controlled lab environment, giving you the right solution for every project, without slowing down your line.

Precision Metrology Services for Austin Manufacturers

HAK Metrology provides a full range of dimensional inspection, measurement, and programming services to manufacturers throughout Austin and the surrounding Central Texas region. We offer on-site service, deploying our team and equipment directly to your facility, and in-house laboratory services at our Houston lab for projects requiring our controlled measurement environment. Whatever your project scope or production schedule, we will find the right approach.


Metrology services in Houston, TX

CMM Inspection Services

Our Leitz bridge-style CMM delivers ultra-high accuracy dimensional analysis for the most complex part geometries. Operating within a state-of-the-art controlled environment lab, we validate parts against engineering drawings using continuous contact measurement and a wide range of probe heads and sensors. The system runs on PC-DMIS software — a fully customisable, intelligent platform that captures, evaluates, and reports dimensional data to the most precise detail. For Austin manufacturers in semiconductor, aerospace, medical device, and general manufacturing, CMM inspection is available both at our Houston facility and for on-site projects requiring our portable capabilities.

Learn More

CMM Programming

If your Austin facility owns a CMM but lacks the in-house expertise to programme it effectively, HAK can help. We specialise in developing customised CMM programmes for your specific parts and production processes, with particular experience in difficult, complex geometries where drawing requirements demand exceptional precision. Our programmes are built to reduce cycle times, improve repeatability, and ensure your measurement routines are capturing every critical feature consistently. Because we understand both the programming and the manufacturing sides of metrology, we do not just write the software — we optimize your measurement process end to end.

Learn More
CMM inspection services in Dallas, TX
Laser measurement services in Dallas, TX

Laser Measurement & Laser Tracker Services

HAK's laser tracker system — certified to the ISO 17025 standard — captures highly accurate 3D measurements across distances of up to 160 meters. Our integrated environmental unit continuously monitors temperature, pressure, and humidity during measurement, compensating in real time to ensure accuracy regardless of on-site conditions. This system is ideal for structural alignment, hole location, large-part inspection, weldment builds, and first article inspections — and it operates entirely at your facility, making it the right tool when shipping large assemblies is not practical. Austin's semiconductor fabrication and aerospace sectors are natural fits for this capability.

Learn More

Portable CMM Services

Our highly versatile portable CMM brings HAK's powerful measuring software and expertise directly to your Austin shop floor. The system captures complex geometries, new design features, and parts in tight spaces — virtually anywhere, without requiring a dedicated inspection room or production shutdown. For Austin-area manufacturers who cannot afford the disruption of shipping precision components to an off-site lab, portable CMM inspection is the practical, accurate solution. Any project, any location.

Learn More
Portable CMM services performed in Dallas, Houston, and Austin, TX
Reverse engineering services provided by HAK Metrology Solutions in Austin, TX

Reverse Engineering

When no drawings or CAD files exist, HAK reconstructs the part from scratch. We evaluate each component individually to determine the optimal reverse engineering approach, deploying a range of tools including bridge CMMs, structured light systems, and laser scanners to capture micron-level data across parts large and small. The result is a highly accurate solid CAD model and manufacturing drawing — built to either design intent (best-fit, modifiable) or as-built specifications, depending on your downstream needs. Whether you are replacing an obsolete component, modernising a legacy assembly, or documenting a proprietary part, HAK delivers the digital data you need.

Learn More

Custom Fixturing and Design

If you want to improve cycle times in your manufacturing process, a custom CMM fixture for your product is essential. We create these custom designs so you can achieve faster output with minimal operator and/or robotic interaction.

Learn More
Custom fixturing and design services in Austin, TX
Reverse engineering services provided by HAK Metrology Solutions in Austin, TX

Third-Party Witness Inspection & GD&T Support

HAK provides independent third-party inspection services for manufacturers who need impartial verification of supplier quality or compliance with international standards, available on a full-time, part-time, or single-day basis. Our team is also trained in Geometric Dimensioning and Tolerancing (GD&T) per the latest ASME Y14.5 standards, offering consulting and support that helps Austin manufacturers reduce non-conformances, improve drawing clarity, and align engineering, production, and quality assurance teams around a shared measurement language.

Learn More

Non-Destructive Examinations (NDE)

HAK's ASNT-certified technicians perform non-destructive examination services that assess material and equipment performance without causing long-term damage to the subject. Our NDE services use advanced techniques to detect defects, verify quality, and ensure assets meet performance and safety standards — delivering certified reports and documentation throughout the process. Both field NDE (on-site at your facility) and in-house laboratory testing are available. For Austin manufacturers in aerospace, defense electronics, and medical devices — where asset integrity is non-negotiable and compliance documentation is mandatory — NDE is a critical part of the quality assurance process.

Learn More
Metrology Services Austin, TX | HAK Metrology Solutions - NDE-2

Industries We Serve in Austin & Central Texas

Austin and the Central Texas region host one of the most diverse and rapidly expanding manufacturing ecosystems in the United States. From semiconductor fabrication and medical device manufacturing to electric vehicle production and aerospace electronics, the demands placed on precision measurement here are exacting. HAK Metrology has the services, expertise, and equipment to meet those demands — and we understand the specific quality standards each of these industries requires.

Semiconductor & Electronics Manufacturing

Austin has established itself as one of the most significant semiconductor manufacturing hubs in North America. Samsung Semiconductor's fabrication facility in Taylor — less than 30 miles from downtown Austin — represents one of the largest semiconductor investments in US history. NXP Semiconductors, Applied Materials, and a dense ecosystem of fabless chip designers and electronics manufacturers further define the region's industrial character.

Semiconductor manufacturing demands dimensional precision that rivals any sector in existence. Wafer handling equipment, precision tooling, fab infrastructure components, and semiconductor packaging all require measurement accuracy that leaves no room for error. HAK's bridge-style CMM, ISO 17025-certified laser tracker system, and portable CMM capabilities are well-matched to these requirements. We provide first article inspection, tooling validation, structural alignment, and ongoing dimensional quality support for manufacturers in the Austin semiconductor corridor.

Medical Devices & Life Sciences

Austin's life sciences and medical device sector has grown significantly in recent years, with manufacturers and research organisations across the region producing components subject to stringent FDA and ISO 13485 quality requirements. Dimensional inspection is not optional in this sector — it is a documented, auditable part of the manufacturing process.

HAK's CMM inspection services produce the certified, traceable dimensional reports that medical device manufacturers require for regulatory compliance and customer audits. Our third-party inspection capability provides the independence that internal quality teams cannot always supply. For Austin life sciences manufacturers managing tight tolerances on implantable components, surgical instruments, diagnostic equipment, or precision fluid-handling devices, HAK provides the documented accuracy your compliance process demands.

Aerospace & Defense Electronics

The Austin metro is home to several aerospace and defense organisations — from university-affiliated research programs to commercial defence electronics contractors. Austin's defence sector is characterised by precision electronics, systems integration, and high-reliability component manufacturing — all areas where dimensional inspection and NDE play a direct role in product quality and regulatory compliance.

HAK's CMM inspection, laser tracker measurement, and ASNT-certified NDE services support the inspection and verification requirements of aerospace and defense electronics manufacturers. Whether you need first article inspection for a new component programme, structural alignment for a complex assembly, or non-destructive evaluation of safety-critical hardware, HAK's team has the expertise and credentials to deliver results that hold up to audit.

Automotive & Electric Vehicle Manufacturing

Tesla's Gigafactory Texas in Austin is one of the largest automotive manufacturing plants in North America, producing high volumes of electric vehicles for global markets. The factory's presence has drawn a growing supply chain of Tier 1 and Tier 2 automotive suppliers to the Austin--San Marcos--Kyle corridor, creating new demand for precision measurement and quality assurance services across the region.

HAK supports automotive and EV manufacturers with CMM inspection for component validation, custom CMM fixturing to improve production cycle times, tooling qualification, and GD&T consulting to reduce non-conformances across the supply chain. For suppliers seeking to meet the exacting quality standards of Austin's EV manufacturing ecosystem, HAK provides the measurement services that support first-time quality and on-time delivery.

Industrial & General Manufacturing

Beyond Austin's signature high-tech sectors, the city's broader manufacturing base — precision machining, industrial equipment, contract manufacturing, and HVAC component production — relies on dimensional measurement to maintain quality standards and meet customer expectations. HAK works with manufacturers of all sizes across Central Texas, customising our CMM inspection, portable measurement, and reverse engineering services to fit the specific needs of each facility.

For smaller Austin manufacturers scaling into volume production for the first time, outsourcing dimensional inspection to HAK provides access to high-accuracy CMM capabilities and experienced metrology professionals without the capital cost of in-house equipment investment. We grow with your production requirements and adapt our service offering as your needs evolve.


FAQs About Metrology Services in Austin, TX

What metrology services does HAK Metrology offer in Austin, TX?

HAK Metrology provides a comprehensive range of precision measurement and inspection services to Austin-area manufacturers, including CMM inspection, ISO 17025-certified laser measurement and laser tracker services, portable CMM inspection, reverse engineering, CMM programming, non-destructive examination (NDE), third-party witness inspection, and GD&T consulting. We offer both on-site service — deploying directly to your Austin facility — and in-house laboratory services at our Houston lab. Contact us to discuss which service best fits your project and timeline.

Do you offer on-site metrology services in Austin?

Yes — on-site deployment is one of HAK's core capabilities and a primary reason Austin manufacturers choose us. Our ISO 17025-certified laser tracker system, portable CMM, and ASNT-certified NDE team can be deployed directly to your shop floor anywhere in the Austin metro and Central Texas region. On-site service eliminates the risk and delay of shipping precision components, keeps your production schedule intact, and gives your quality team immediate access to inspection data as it is generated.

Can HAK Metrology support semiconductor manufacturers in Austin?

Yes. Austin and the surrounding Central Texas region — including Samsung Semiconductor's facility in Taylor — represent a significant and growing semiconductor manufacturing cluster. HAK's CMM inspection, ISO 17025-certified laser tracker, and portable CMM capabilities are directly applicable to wafer handling equipment alignment, precision tooling validation, fab infrastructure measurement, and semiconductor component inspection. We understand the tight tolerances and documentation standards required in semiconductor manufacturing and can support both one-time project needs and ongoing quality programmes.

What industries do you serve in Austin and Central Texas?

HAK serves manufacturers across semiconductor and electronics, medical devices and life sciences, aerospace and defense electronics, automotive and EV manufacturing, and general industrial manufacturing. Austin's industrial base is one of the most diverse in Texas, and our service offering is designed to adapt to its demands — from the micron-level tolerances required in semiconductor fabrication to the large-scale structural alignment work common in EV and aerospace assembly. If you are unsure whether we serve your specific application, contact us — we likely have relevant experience to share.

How does portable CMM inspection work?

A portable CMM is a handheld or arm-based coordinate measuring device that can be set up and operated anywhere — on your shop floor, at a fabrication yard, or in the field — without requiring a dedicated inspection room. Unlike a fixed bridge-style CMM, which requires parts to be brought to the machine, a portable CMM brings the measurement capability to the part. HAK's portable CMM captures complex geometries and parts in tight spaces with high accuracy, using powerful measuring software to generate the same quality of dimensional data you would expect from a laboratory environment — without the disruption to your production workflow.

How quickly can HAK complete a metrology project in Austin?

Turnaround time depends on project scope, part complexity, the services required, and your location within the Austin area. HAK is committed to working within the production timelines of our clients — we understand that a delayed inspection report means a delayed shipment, and we treat schedule adherence as a core part of our service commitment. For time-sensitive projects, including first article inspections ahead of customer delivery deadlines, contact us directly with your requirements and deadline. We will give you a clear answer on timing and do everything we can to meet it.

Why should I outsource dimensional inspection instead of doing it in-house?

Outsourcing dimensional inspection and NDE to a specialist like HAK gives you access to high-accuracy equipment — including a Leitz bridge-style CMM, ISO 17025-certified laser tracker, and structured light scanning systems — that would be costly to purchase, maintain, staff, and keep calibrated in-house. It also gives you ASNT-certified NDE technicians and GD&T expertise on demand, without the overhead of permanent specialist headcount. For manufacturers in Austin's fast-moving semiconductor, medical device, and automotive sectors, outsourcing metrology is often both a quality improvement and a cost reduction — freeing your internal resources for the production activities that generate direct value.

If You Need Precision,
You Need HAK

We are dedicated to providing your organization with the highest level of accuracy in the industry. Contact us for a free quote today.

* Indicates required questions
Name *
First
Last
Organization *
Phone # *
Email *
Tell us about your needs *

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Call For A Free Quote
(281) 678-5305
Leave a Review
600 Kenrick Dr, Suite D3
Houston, TX 77060
The contents of this webpage are Copyright © 2026 HAK Metrology. All Rights Reserved. Privacy
Powered by: